Fireblocker FB 120
FB 0120
The FB 0120 is a newly developed dropliner from Pyrotex combined with PU-FR. Because of this special combination, this article gets good values in HTI and RTI tests. As a single layer it already reaches LS 1 on the ISO 9151 and EN ISO 6942.
This article is not standard in stock. Minimum purchase on request.
Customer specific fireblockers:
In addition to the above fireblockers / moisture barriers, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Fireblocker FB 009
FB 009
Our FB 009 is a variation of moisture barrier / fireblocker on the FB 008 II with the same non-woven membrane on which an ePTFE BiCo membrane is laminated. This fireblocker has been tested on EN 469 and EN 17493 260 ° C.
Because of the light weight of this 2 layer fireblocker and the highly breathable membrane, we have achieved a top RET value for this membrane which is available on request. Very important for the current fire suits, where RET values and combating heat stress are spearheads.
This article is not a stock item, the minimum purchase is 500 running meters.
Customer specific fireblockers:
In addition to the above fireblockers / moisture barriers, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Abel II
Abel II
The Abel II is a flame retardant anti static polyester twill 1/2 which is laminated with a highly breathable FR membrane and anti static modacrylic fleece on the back. This article is used as a softshell where requirements for flame delay and anti static are requested.
Partly because of our laminating method which we have developed for years, we are able to achieve a good RET value ourselves in 3 layer fleece variants. Exactly what is required of clothing that is used during cold and / or wet conditions.
The Abel II is only produced on order. The standard colors are Hi Vis Yellow and Hi Vis Orange. Of course, many colors are possible with a minimum purchase of 500 running meters, also for the Hi Vis Yellow and Orange.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Omega Fleece II
The newly developed quality Omega Fleece II is a modacrylic blend cloth that meets a range of requirements, including EN 11612, EN 11493-3 and EN 61482-1-2 (2-2 is tested). Because XLA fiber is added in the fabric, we can keep the stretch in this cloth during industrial washing, even up to 95 degrees. This 3 layer variant is laminated with a PU-FR membrane and modacryl anti static fleece, the complete layer package. You do not need a separate lining here.
Again we have succeeded in maintaining optimal stretch in the Omega Fleece II, which makes this a very comfortable solution for work where freedom of movement and safety are spearheads. Think of work on oil rigs, oil refineries etc.
The Omega Fleece II is only produced to order and is available in a limited number of colors, including dark blue and Hi Vis Yellow. The minimum purchase of this article amounts to 500 running meters.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or +31-(0)546 452 152.
Fireblocker FB-3D-80-260
This moisture barrier, which we have recently developed, consisting of a 3d Spunlace aramid combined with an ePTFE BiCo membrane is ideal as an insulation liner. Due to the 3D profile of the fabric, it creates an extra layer of air in the layer structure, which provides extra insulation values.
Naturally, this moisture barrier can also be taped and even for this variant we have achieved a RET value that is worth inquiring.
This article is not a stock item. MOQ`s on request.
Customer specific fireblockers:
In addition to the above fireblockers / moisture barriers, we can of course also produce customer specific weights and compositions. Please contact us via or +31- (0) 546 452 152.
Fireblocker FB -3D-125-260
This fireblocker / moisture barrier, which we have recently developed, consisting of a 3d Spunlace aramid combined with an ePTFE BiCo membrane is ideal as an insulation liner. Due to the 3D profile of the fabric, it creates an extra layer of air in the layer structure, which provides extra insulation values.
Naturally, this moisture barrier can also be taped and even for this variant we have achieved a RET value that is worth inquiring.
This article is not a stock item. MOQ`s on request.
Customer specific fireblockers:
In addition to the above fireblockers / moisture barriers, we can of course also produce customer specific weights and compositions. Please contact us via or +31- (0) 546 452 152.
Omega II
The newly developed quality Omega II is a modacrylic blend cloth that meets a range of requirements, including EN 11612, EN 11493-3 and EN 61482-1-2. Because XLA fiber is added in the fabric, we can keep the stretch in this cloth during industrial washing, even up to 95 degrees. This 2 layer variant is laminated with a PU-FR membrane. There is deliberately no 3rd layer added, so you can decide for yourself what you use as lining. For example, a loose lining that you can remove from the jacket if desired.
Again we have succeeded in maintaining optimal stretch in the Omega II, which makes this a very comfortable solution for work where freedom of movement and safety are spearheads. Think of work on oil rigs, oil refineries etc.
The Omega II is only produced on order and is available in a limited number of colors, including dark blue and Hi Vis Yellow. The minimum purchase of this article amounts to 500 running meters.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or +31-(0)546 452 152.
Baccarat Fleece 160
The Baccarat Fleece 160 is a 3 layer laminate based on a Polyester knit with a water repellent finish. Against this, we laminated a highly breathable membrane with microfleece on the back. This article is extremely easy to process as a soft shell, has a high abrasion resistance and is well insulating for the colder conditions.
Naturally, the Baccarat Fleece 160 has retained its stretch properties in three layers of laminates and is therefore a very good solution when comfort and insulation are required of the garment.
The Baccarat Fleece 160 is produced per order and can therefore always be ordered in the desired color. The minimum purchase is 300 running meters per color.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Reggie
The Reggie was developed on the basis of a few questions from the market, in which a 3-layer laminate without lycra was sought, but with Bi-stretch properties. We have realized this with a 100% polyester fabric, a highly breathable PU membrane and a knit on the back.
In addition to the great bi-stretch qualities of the Reggie, it is also industrially washable in accordance with EN 15797. We have achieved this by applying a special laminating technique in which we are able to maintain the stretch.
Of course, the Reggie is also available in a 2 layer version, without knitting on the back. Pintail currently brings the Reggie in 5 different basic colors, namely Black, Dark Blue, Hi Fish Yellow, Hi Fish Orange and Hi Fish Red. Customer-specific colors can of course be ordered with a minimum purchase of only 500 running meters.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Dropliner DL 003-260
The dropliner DL 003-260 is a flame retardant dropliner which is made of a strong M-AR + Viscose FR knit laminated with an ePTFE BiCo membrane. This article is of course watertight to seam taping and is EN 469 tested for fireman's clothing.
Thanks to the use of our highly breathable membranes, we are also able to achieve a good RET value.
We do not have the DL 003-260 in stock as standard. The minimum purchase and colors for this item are on request.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Baccarat Fleece 120
The Baccarat Fleece 120 is a 3 layer laminate based on a Polyester knit with a water repellent finish. Against this, we laminated a highly breathable membrane with microfleece on the back. This article is extremely easy to process as a soft shell, has a high abrasion resistance and is well insulating for the colder conditions.
Naturally, the Baccarat Fleece 120 has retained its stretch properties in three layers of laminates and is therefore a very good solution when comfort and insulation are required of the garment.
The Baccarat Fleece 120 is produced per order and can therefore always be ordered in the desired color. The minimum purchase is 300 running meters per color.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.
Baccarat
The Baccarat is a 3 layer laminate based on a Polyester knit with a water repellent finish. Against this we laminated a highly breathable membrane with a knit on the back. This article is extremely easy to process as softshell, has a high abrasion resistance and can be taped for water tightness on the seams.
Naturally, the Baccarat has retained its stretch properties in three layers of laminates and is therefore a very good solution when comfort is required of the garment.
The Baccarat is produced per order and can therefore always be ordered in the desired color. The minimum purchase is 300 running meters per color.
The Baccarat can also be ordered as a 2 layer version. Contact us for the different options.
Customer specific Workwear:
Besides the above Workwear products, we can of course also produce customer specific weights and compositions. Please contact us via or + 31- (0) 546 452 152.